Skip to main content
Search Button
Librairie Kobo Canada Cartes cadeau Aide

Kobo Rakuten

Ma liste d'envies

Panier

Vous profitez des avantages réservés aux VIP !

Article(s) non disponible(s) à la vente
Veuillez vérifier votre panier. Vous pouvez supprimer le ou les articles qui ne sont pas disponibles maintenant ou nous les supprimerons automatiquement au moment du règlement de la commande.
articlesarticle
articlesarticle

Recommandé pour vous

Loading...


Meilleures séries dans ce pays : Canada

1-12 sur 12 résultats pour « tomoki shiotani »
Skip side bar filters

  • Acoustic Emission Testing

    Basics for Research – Applications in Engineering

    Modifié par Christian U. Grosse, Masayasu Ohtsu, Dimitrios G. Aggelis, Tomoki Shiotani ...
    Collections series Engineering (R0)
    This book provides an introduction to Acoustic Emission Testing and its applications to different materials like concrete, steel, ceramics, geotechnical materials, polymers, biological structures and wood. Acoustic Emission Techniques (AET) techniques have been studied in engineering for a long time. The techniques are applied more and more to practical investigations and are more and more ... En savoir plus

    $204.99 CAD

Les lecteurs de ce roman ont aussi aimé

  • RF Coils for MRI

    Modifié par J. Thomas Vaughan, John R. Griffiths ...
    Collections series eMagRes Books
    The content of this volume has been added to eMagRes (formerly Encyclopedia of Magnetic Resonance) - the ultimate online resource for NMR and MRI.To date there is no single reference aimed at teaching the art of applications guided coil design for use in MRI. This RF C... ... En savoir plus

    $200.99 CAD

  • Non-Destructive Testing in Civil Engineering 2000

    par T. Uomoto ...
    The first international symposium on NDT-CE (Non-Destructive Testing in Civil Engineering) was held in Berlin, Germany in 1991. Successive symposia were held throughout Europe until 1997. This, the 5th symposium is organized as SEIKEN SYMPOSIUM No. 26, and is sponsored by the Institute of Industrial Science, at the University of Tokyo, Japan. Original objectives of the NDT-CE symposium have been ... En savoir plus

    $375.99 CAD

  • Ultrasonic Transducers

    Materials and Design for Sensors, Actuators and Medical Applications

    Modifié par K Nakamura ...
    Collections series Woodhead Publishing Series in Electronic and Optical Materials
    Ultrasonic transducers are key components in sensors for distance, flow and level measurement as well as in power, biomedical and other applications of ultrasound. Ultrasonic transducers reviews recent research in the design and application of this important technology.Part one provides an overview of materials and design of ultrasonic transducers. Piezoelectricity and basic configurations are ... En savoir plus

    $278.99 CAD

  • Industrial X-Ray Computed Tomography

    Modifié par Simone Carmignato, Wim Dewulf, Richard Leach ...
    Collections series Chemistry and Material Science (R0)
    X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully ... En savoir plus

    $140.99 CAD

  • Tubular Structures XVI

    Proceedings of the 16th International Symposium for Tubular Structures (ISTS 2017, 4-6 December 2017, Melbourne, Australia)

    Modifié par Amin Heidarpour, Xiao-Ling Zhao ...
    Tubular Structures XVI contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 16th International Symposium on Tubular Structures (ISTS16, Melbourne, Australia, 4-6 December 2017). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the ... En savoir plus

    $515.99 CAD

  • Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures

    State-of-the-Art Report of the RILEM Technical Committee 239-MCM

    Modifié par Masayasu Ohtsu ...
    Collections series Engineering (R0)
    The research and its outcomes presented in this book treat applications of NDT techniques to on-site measurements. These on-site measurements have been marginally successful as each technique requires a particular analysis. In this regard, visualization and imaging of results are in great demand for practitioners and engineers for inspection. This volume, in which on-site measurements of concrete ... En savoir plus

    $115.99 CAD

  • Dielectric Elastomers as Electromechanical Transducers

    Fundamentals, Materials, Devices, Models and Applications of an Emerging Electroactive Polymer Technology

    Modifié par Federico Carpi, Danilo De Rossi, Roy Kornbluh, Ronald Edward Pelrine, Peter Sommer-Larsen ...
    Dielectric Elastomers as Electromechanical Transducers provides a comprehensive and updated insight into dielectric elastomers; one of the most promising classes of polymer-based smart materials and technologies. This technology can be used in a very broad range of applications, from robotics and automation to the biomedical field. The need for improved transducer performance has resulted in ... En savoir plus

    $220.99 CAD

  • Measurement, Instrumentation, and Sensors Handbook

    Electromagnetic, Optical, Radiation, Chemical, and Biomedical Measurement

    Modifié par John G. Webster, Halit Eren ...
    The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses ... En savoir plus

    $200.99 CAD

  • Non-Destructive Assessment of Concrete Structures: Reliability and Limits of Single and Combined Techniques

    State-of-the-Art Report of the RILEM Technical Committee 207-INR

    Modifié par Denys Breysse ...
    Collections Livre 1 - RILEM State-of-the-Art Reports
    This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities ... En savoir plus

    $179.99 CAD

  • Non-Destructive Evaluation of Reinforced Concrete Structures

    Non-Destructive Testing Methods

    Modifié par Christiane Maierhofer, Hans-Wolf Reinhardt, Gerd Dobmann ...
    Collections series Woodhead Publishing Series in Civil and Structural Engineering
    Engineers have a range of sophisticated techniques at their disposal to evaluate the condition of reinforced concrete structures and non-destructive evaluation plays a key part in assessing and prioritising where money should be spent on repair or replacement of structurally deficient reinforced concrete structures. Non-destructive evaluation of reinforced concrete structures, Volume 2: Non ... En savoir plus

    $264.99 CAD

  • Smart Sensors for Industrial Applications

    Modifié par Krzysztof Iniewski ...
    Collections series Devices, Circuits, and Systems
    Sensor technologies are a rapidly growing area of interest in science and product design, embracing developments in electronics, photonics, mechanics, chemistry, and biology. Their presence is widespread in everyday life, where they are used to sense sound, movement, and optical or magnetic signals. The demand for portable and lightweight sensors is relentless in several industries, from consumer ... En savoir plus

    $197.99 CAD